This is a bottle conversion kit for the Snowpeak Max 1 with parts from the Snowpeak AP900B. Max fill pressure once installed is 250bar, as per the AP900b max pressure. Purchase at your own risk. These parts were not made for the Max 1, they were made and modified from the Snowpeak AP900B.
Comes with bottle gauge on the bottle adapter and fill probe hole for filling. You will use the back cap of your max 1 air tube to screw this bottle kit onto your rifle. Leave the back cap on the gun then screw the bottle adapter onto the gun, align the bottle under your barrel,then tighten the end screw to lock the bottle adapter into the right orientation.
