NOTE: I will usually have to machine these barrels for you after you order as I have been too busy to get some done ahead of time. So your order may be delayed a few days. Please have patience and I’ll get them done and shipped. Thanks!
Turn your PP750 into a carbine with this longer barrel! These are Diana Stormrider Rifle Barrels threaded for the PP750, so they have M10x1 threads on the end with the factory crown on the m10 threaded version. You can choose to have it cut and threaded 1/2×20 for a standard airgun muzzle brake or Moderator. The 1/2×20 threaded barrels are cut, crowned and threaded on the lathe so there isn’t any polishing or professional crowning procedures done. M10x1 moderators or 1/2×20 are available for this barrel for US customers only. (choose the Chaser/Stormrider moderator in the parts section for the m10 thread version or choose the M60 moderator with 1/2×20 threads for the 1/2×20 barrel). Muzzle brakes in 1/2×20 and m10x1 are available as well in the airgun parts section for Canadians that can’t have a moderator. Muzzle brake shown in picture is not included. You can buy it here: https://airgunarcheryfun.ca/ags-custom-steel-blued-muzzle-brake-1-2×20-or-m10x1/
Barrel bands can be purchased for the long barrel for extra stability (if in stock) or you can drill out your end cap to 1/2″ so the existing shroud can be used and a short section of carbon fiber can be added on the part of the barrel that sticks out of the end of the shroud. Please let me know what you want sent with it, the short or long piece of carbon fiber. (Barrel bands are for the long barrels, not meant to fit the stock shroud.)
For Canadian Residents its important to check your velocity after installation to ensure it remains under 500fps. Even with the long barrel this is still considered a pistol and so must remain under 500fps or will be considered a restricted firearm.
looking for a 14 inch barrel for my pp750....is that possible
Please advise if you can make every thing in stunder for pp750 in .177. lenth require 10 inch , Please advise us for next stop. kindest regards
Like many others looking for the longer barrel for my PP750 Can you make it in a shorter say 14 inch configuration threaded 1/2-20?
Just wanted to check in with you guys and see when are you guys going to have the barrels in for the PP750 22 cal. I would like to talk with you guys about my air rifle. Email me back please with your number or just text me and I will go from there. Thanks again, Jason Creel 601-938-8919 jasoncreel1972@gmail.com
I have a Notos 22 cal. and hoping that your gauge block and barrel can work on my gun(Notos)? Please let me know what I can do. Thanks, JC
Hi, trying to order but will not let me chose both .177 ,& 16" together. Says, " choose options " but will not allow . Regards Brian
Hi! It is because it is out of stock. sorry about that
Hi. Do you know when the. 22 barrel wil be in stock( with the With 1/2" x20 adapter)? Thanks
Hi...could you do a 5,5m barrel but 20" long??. How much it will cost??? Regards.
Longer barrels allow for lower air consumption as the bullet has more time to accelerate. For full advantage, the regulator pressure may be lowered...but look at this: https://www.youtube.com/watch?v=U5hmeDDadqg
Hello do you know when thé long barrel and the cover disponible it ?
Bonjour est ce que vous aurez bientôt de nouveau en stock le canon long 177. avec carénage carbone ?
Je voudrais uniquement le canon en .22 Est-ce possible ? Merci