• 4500 psi max
• 12v
• Capable of running on 12V car battery, and 110v or 220v with adapter
• Air Outlet – 8L/min
• Auto Shut-off/Set pressure
• Moisture Filter
•Air Cooled
Airgunarcheryfun will warrant this compressor for 6 months after purchase.
This compressor uses synthetic compressor oil, which lubricates better and reduces heat damage, and is more suited to filling bottles. You still need to give the compressor a 15 minute rest every 15-20 minutes of fill time, but it will increase the longevity of the compressor if it’s used regularly to fill to 4500psi.
This system with oil requires oil change at 10 hours and every 50 hours after that, or minimum once a year. Oil bottle is included in the box with the right amount of oil. (1 Oz of synthetic compressor oil).
An external filter is also recommended and available in the choices.
For more info you can contact me at support@airgunarcheryfun.ca.
Please let me know when this product is back in stock. Thanks
So I'm pretty happy. Pumped up my Umarex Airsaber to 3600PSI in six minutes while I sipped tea. That's much better than my one hour of handpumping and passing out when I reached 3400. It also pumped two HPA canisters to 3000 PSI each in less than 10 minutes. As long it has decent longevity I'll be pretty pleased. Air rifle hunting is going to be a breeze... (Sorry for the pun)
Bought this a couple of day's ago and have used it several times works like a charm and saving my 74 year old back from the hand pump. Thanks to Wes for all his help and support great to have a shop for air gun supplies here in Saskatchewan as I try and shop locally when I can. I look forward to dealing with Wes in the future.
i just love this little compressor it does exactly what i wanted, it pumps away like a little trouper. it fills my Xisisco Gun with no problem and I use it to fill my 600 L air tank to 3000 psi, run it for 15 minutes at a time and cool off for the same, takes a bit of time but once up there maintaining 2000 to 3000 psi goes a lot quicker. thanks Wes great compressor and it beats hand pumping...
RE: JTS GX-E-CS3 Compressor In Stock May 2020 Please reserve one for me. Thanks.
My Xisico JTS compressor was delivered yesterday. So just a short review for those interested. Wes at Airgun Archery Fun responded to any questions I emailed him within minutes. Also I ordered on Saturday and he shipped out on Monday. Excellent service. Arrived 17 days from time of placing the order. Not too bad considering it shipped from Moose Jaw, Sk, Canada to Mississauga, On, Canada, into the USA and on to Chicago where it went through customs. It was turned over to USPS in Chicago and then took 6 days to arrive at my door in St. Louis, MO. It's about a 3 hour drive from Chicago to St. Louis. Compressor & converter were packed very well inside styrofoam inside a box. No damage. I read instructions and then tested it with plug in fill whip. Everything tested OK. So I filled my small Guppy air tank (118 cu in) from 1900 to 4500 psi. Total compressor time was 86 minutes. I would fill for 20 minutes then shut off compressor and let cool for 20 minutes. After each 20 minutes period I would open bleed valve to drain a small amount of water. After I filled the Guppy, I removed the small final filter at Guppy to inspect. It was dry and no dirt or any discoloration. So seems that the internal water separator supplied with the compressor works well. I used a sound meter app on my android phone and sound lever at about 4 feet was 79 - 80 dBA. Not bad noise at all. Thats about all I know. I'm filling my Great White (550 cu in) now.
Please let me know if this product is back in stock. Thanks, Victor Xxx-xxx-xxxx
Ok thanks Victor will do