- Easy operation: The thermometer shows the current temperature of the cylinder
- Stable function: Use copper wires, with the frequency of 1800w
- Quick air inflation: Double recycle system, make the quick air inflation
- Spray technology, excellent waterproof: Apply high-tech metal spray technology, anti-corrosion, waterproof, reliable quality.
- Luminous piezometer: Accurate measure, use inflatable pointer to avoid vibrating
- Explosion proof valve & overload protection set: Water & air double cooling methods, water cooling cycle
- Noise reduction: Low operation sound
- Power: 110V / 60HZ
- Motor Power: 1800W
- Charge pressure: 30MPA
- Air flow rate: 50L/MIN(13.2GPM)
- Working Pressure: 300BAR 30MPA 4500PSI
- Cooling System: Water & air double cooling methods
- Size: 14.2*7.1*14.6 inch ( L * W * H)
- Net Weight: 35.72lbs
1 x Main machine
1 x Hose
2 x Water pipe
1 x Accessory package
1 x Water pump
1 x User manual
1. Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed.
2. Make sure the socket could withstand a current greater than 8A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload of the socket.
3. Please do not touch the head section after the machine was just being used, so as to not be burnt by high temperature.
4. When it is used for inflating slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder temperature could be better controlled.
5. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time.
6. If the machine vibrates violently, please add pad or towel under the compressor
7. The compressor working, the cooling system should be working at the same time
8. No.46 wear resistant hydraulic oil. The machine must be working with oil, so you must pay attention to the level of oil.